Since we started using IXL and Tri-Chem, we have not lost a single fuel injector or rear end due to bearing failure. We have saved $115,00.00 in maintenance on our trucks just last year alone. I know these products work.
-M. Ashworth, Ashworth Brother’s Trucking, Inc.
Tri-Chem 4020 Diesel Fuel Additives w/IXL
Run leaner and cleaner!
Tri-Chem AM 4020 is a diesel fuel additive that protects and lubricates the top end of the motor, while also increasing fuel efficiency. Tri-Chem AM 4020 reduces injector failure by reducing carbon and gum build up. And unlike many fuel additives, Tri-Chem AM 4020 is highly concentrated—only a few ounces are needed each time you fill up. One quart (32 ounces) of Tri-Chem AM 4020 will treat up to 512 gallons of diesel fuel.
If you have a diesel engine that is smoking, pinging, dieseling, or that has excessive carbon or gum buildup, then you need to try some Tri-Chem AM 4020 today! We guarantee that you will be impressed.
Tri-Chem AM 4020 will also protect your fuel from gelling in cold environments. Use the cold weather instructions below for maximum performance in when the temperature drops!
Instructions for Use:
For best results pour the appropriate amount of Tri-Chem AM 4020 into your tank immediately before you add the diesel fuel. The amount of Tri-Chem AM 4020 you need to use varies depending on the time of year and the temperature in which you will be operating your vehicle. Follow these instructions:
SUMMER TREATMENT (Above 32°F):
1 Oz. Tri-Chem treats 16 gallons of diesel fuel
WINTER TREATMENT (Below 32°F):
Increase dosage to prevent gelling; use 1 Oz. Tri-Chem for every 4 gallons of diesel fuel.
Use 1 Oz. Tri-Chem for every 2 gallons of diesel fuel in temperatures below -10°F.